Surge protection before a 24 VDC source.
- Thread starter Elcan
- Start date
Thank you!
AustralIan
Member
That's a good idea elcan. Example
https://www.electricautomationnetwo...l-block-phoenix-contact-ukk-5-dio-u-o-2791032
https://www.electricautomationnetwo...l-block-phoenix-contact-ukk-5-dio-u-o-2791032
Mickey
Lifetime Supporting Member
The PDF I posted in my post #7 shows just that.
Don't forget AC coils also produce inductive spikes.
Similar Topics
Hi Folks,
Is surge protection recommended for field wiring connected to PLC inputs? For example, I/O originating from field devices located...
by spec i must supply surge protection for each individual PLC input in my panel. These devices are all of the voltage free (dry contact type)...
Hi,
Unfamiliar ground here, but a client is asking for surge protection for digital and analog instruments. I did some research on Weidmuller and...
I currently have these installed in a few cabinets:
https://www.alliedelec.com/phoenix-contact-2920641/70208204/
But they're increasing the mA...
I need some help and education on surge suppression.
Trying to select some surge protection for some Allen Bradley 100-C series contactors and...