tulip Member T Join Date Oct 2005 Location ist Posts 236 Feb 24, 2012 #1 I have got two TP177 HMIs.One of them is damaged and no backup.Can I transfer program from old one to other?How and which cable must be use?Thanks in advance....
I have got two TP177 HMIs.One of them is damaged and no backup.Can I transfer program from old one to other?How and which cable must be use?Thanks in advance....
idell Member I Join Date Nov 2009 Location Bucharest Posts 97 Feb 24, 2012 #2 what model of TP177 do you have ? here is useful FAQ how to do backup transfer. http://support.automation.siemens.com/WW/view/en/28928854
what model of TP177 do you have ? here is useful FAQ how to do backup transfer. http://support.automation.siemens.com/WW/view/en/28928854
tulip Member OP T Join Date Oct 2005 Location ist Posts 236 Feb 24, 2012 #3 This site is not open.The other question is TP177B series...
idell Member I Join Date Nov 2009 Location Bucharest Posts 97 Feb 24, 2012 #4 i have PDF version but it exceeds limit of 300 kB on this forum (329KB actually)