XTEL program help

Moustafa Elsherief

Member
Moustafa Elsherief
Join Date
May 2007
Location
giza
Posts
154
Hello everybody

Now I work for cane upgrade from Telemecanique CPU to S7-300 one.

I used Virtual machine to run OS2 platform to run XTEL program like attached Pic.

The crane is two separated electric room each has its indvidual CPU "see attached PIC."

According to the crane operation sequence, I expected that this two CPUs exchange some bits "not sure master/master or slave/master"

Can any one used xtel before show me where to find these exchanged bits???

I fell crazy with this old program...

WhatsApp Image 2017-12-26 at 12.47.54 PM (1).jpg WhatsApp Image 2017-12-26 at 12.47.54 PM.jpg WhatsApp Image 2017-12-26 at 12.48.46 PM.jpg
 

Similar Topics

B
XTEL on OS2
hi, please could someone help me or have a tuto how to use TSX47 software: XTEL on OS2 instaled into virtual PC? thanks.
Replies
0
Views
1,791
biab
B
O
ccw ladder program
my ccw softwer stops working when i add and try to open a ladder program.
Replies
0
Views
4
Ousmane Dia
O
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
106
TheCaptain2000
T
A
Trying to get copy of Red Lion G315 HMI program but support upload was not ticked.
Hi All, As a precaution my company has been collecting copies all the HMI and PLC programs. I have recorded copies of most of our sites...
Replies
0
Views
73
Angus_Fergusson
A
A
Migrating Program from S7-300 to RSLogix500 & Migration from CompactLogix to RSLogix500
So basically i have 2 queries : 1. I have a program file of S7-300 PLC which i want to migrate in RSLogix500.In short i want to convert my simatic...
2
Replies
15
Views
279
geniusintraining
geniusintraining
Back
Top Bottom