zelio soft 2 usb to serial bridge drivers 32 bit

mtixente

Member
M
Join Date
Aug 2012
Location
durban
Posts
22
hi everyone, i am struggling to establish communicatio between PLC and laptop. i am using windows 7 32 bit.

i am getting error no. D46_86 . please help. i also tried to download 64 bit drivers they are not working!!

thanks in advance
 
Please check any other program is using your COM port? or not. Programs like RSLinx. If yes then shut down the program and then try....It will work.
 

Similar Topics

A
Make shift register with Zelio Soft 2 for Smart Relay Zelio Logic.
Good afternoon colleagues, a pleasure to greet you. In this opportunity I require some help from you. I am trying to make a shift register in...
Replies
2
Views
2,218
kallileo
K
K
Zelio soft laddet rising edge.
Helllo, I am programming ZELIO SOFT in Ladder. I'am looking for a rerisingvedge. i want a SET coil to be set Whem a digital input goes from...
Replies
1
Views
3,152
Lare
L
chud
Zelio soft 2 and Windows 8
Really sorry for bringing this up as I know people have asked this site to death for windows7 64 bit driver. Does the windows 7 64 bit driver...
Replies
5
Views
6,791
motordata
M
G
Schneider SR2B201B Zelio soft 2 question
I'm not familiar with this software at all. I have most of the ladder logic working except for the fact that I need two pumps to alternate, or...
Replies
6
Views
4,365
Lancie1
Lancie1
M
zelio soft PLC set & reset
hi i am new to Scheider electric PLC, i wrote a simple traffic light progamme using three LED's. i used set and reset to turn on and off my LED's...
Replies
5
Views
4,098
jrwb4gbm
J
Back
Top Bottom