PLCS.net - Interactive Q & A

PLCS.net - Interactive Q & A (http://www.plctalk.net/qanda/index.php)
-   LIVE PLC Questions And Answers (http://www.plctalk.net/qanda/forumdisplay.php?f=2)
-   -   EvoLabels Labeler ( Flexwipe ) - Interfacing with ControlLogix (http://www.plctalk.net/qanda/showthread.php?t=130021)

Baker in Virginia July 20th, 2021 03:35 PM

EvoLabels Labeler ( Flexwipe ) - Interfacing with ControlLogix
 
Good Afternoon ,

Thinking of replacing a Labeler with a brand , named EvoLabels ( Flexwipe ).
Sounds like their communication is using Modbus TCP . I know that ProSoft would be an option . Is there any other methods that you would recommend ?

From Evolabel's manual ......

"Evolabel printers provide a Modbus TCP interface which can be accessed on the standard Modbus TCP port 502. "

Thanks so much ,

Contr_Conn July 21st, 2021 09:22 AM

Depending on ControlLogix Ethernet module, you may be able to use Modbus TCP Client AOI that is available in the Sample code library.

agnusmcbee July 30th, 2021 06:53 AM

Quote:

Originally Posted by Contr_Conn (Post 890692)
Depending on ControlLogix Ethernet module, you may be able to use Modbus TCP Client AOI that is available in the Sample code library.

Thanks, very helpful


All times are GMT -4. The time now is 05:07 PM.

.