EICS
Member
First Time CCW user, been using all rockwells other suites for years.
I have CCW V13 installed and have configured my PLC and HMI (the HMI tools are terrible if you have used FTV for years) and have them communicating and my project is 90% completed.
my issue is transferring the application to HMI, i cannot seem to get the comms to work from my machine and i am transferring the application to the terminal via USB stick as an export file from CCW as i have spent way too long trying to get the comms to work.
can anyone give me hints on how to config the HMI to accept direct downloads for my machine. its a 2711R-T7T Panelview 800
i have set the terminal to IP 192.168.0.101 my machine is on 192.168.0.230 but i cannot get it to see the terminal. i have tried Serial as well. i have no idea whats wrong.
what are the options for downloads direct to terminal ?
i see the terminal has
-DB9 port ( which is what the PLC is connected to)
-USB micro Port
-Ethernet port.
-USB A port(which i am using)
I have CCW V13 installed and have configured my PLC and HMI (the HMI tools are terrible if you have used FTV for years) and have them communicating and my project is 90% completed.
my issue is transferring the application to HMI, i cannot seem to get the comms to work from my machine and i am transferring the application to the terminal via USB stick as an export file from CCW as i have spent way too long trying to get the comms to work.
can anyone give me hints on how to config the HMI to accept direct downloads for my machine. its a 2711R-T7T Panelview 800
i have set the terminal to IP 192.168.0.101 my machine is on 192.168.0.230 but i cannot get it to see the terminal. i have tried Serial as well. i have no idea whats wrong.
what are the options for downloads direct to terminal ?
i see the terminal has
-DB9 port ( which is what the PLC is connected to)
-USB micro Port
-Ethernet port.
-USB A port(which i am using)