I have a Brand new Panelview 800 2711R T7T A HMI that I can not connect to.
Laptop IP address is 192.168.12.54
Static IP on HMi is 192.168.12.5
Rslinx can not find it.
When I do an Out-of-box Reset Rslinx can find it once using DHCP, but then it can't find it after I load the application, disable DHCP and change back to Static.
I had almost the same problem a while back here:http://www.plctalk.net/qanda/showthread.php?t=104461&highlight=panelview+800
but this time rslinx can't even see it. but I can ping it from Laptop.
How do other folks find a brand new HMI with rslinx using Ethernet? I have not tried with a usb cable.
The way I try is go to settings screen in CCW, validate project, click download then Connection Browser pops up, I open AB_ETHIP-1 Ethernet connection and it shows all my previous connections with red X.
I am using CCW 12.00.00 with HMI FW 5.013
Any help or insight is appreciated.
Laptop IP address is 192.168.12.54
Static IP on HMi is 192.168.12.5
Rslinx can not find it.
When I do an Out-of-box Reset Rslinx can find it once using DHCP, but then it can't find it after I load the application, disable DHCP and change back to Static.
I had almost the same problem a while back here:http://www.plctalk.net/qanda/showthread.php?t=104461&highlight=panelview+800
but this time rslinx can't even see it. but I can ping it from Laptop.
How do other folks find a brand new HMI with rslinx using Ethernet? I have not tried with a usb cable.
The way I try is go to settings screen in CCW, validate project, click download then Connection Browser pops up, I open AB_ETHIP-1 Ethernet connection and it shows all my previous connections with red X.
I am using CCW 12.00.00 with HMI FW 5.013
Any help or insight is appreciated.