View Single Post
Old July 21st, 2021, 08:59 PM   #1
descaldec
Member
Australia

descaldec is offline
 
Join Date: Jul 2012
Location: Dundas
Posts: 3
PanelView700 Fatal 3B

Panelview Plus 700/2711P-RDK7C/Logic Module 2711P-RP8D/Factory Talk View Studio 12.00.00/Windows10. Ethernet.
I bought a brand new PVP700 display unit. I attached the old Logic board and message appeared FATAL 3B. Docs determine this is a firmware upgrade needed. I downloaded file to PC ok. Cant hookup to the display using ethernet. I know the IP address is 192.168.9.255 from cmdprmpt arp-a. I can see the panel in runtime target panel. Using firmware upgrade facility just wont connect to terminal
  Reply With Quote