Allen Bradley 1336 Impact Drive

badmancan

Member
Join Date
Jan 2021
Location
Cluj-Napoca
Posts
7
Hello,

I am trying to run an encoderless motor with my Allen Bradley 1336 Impact Drive but I cannot get past the Vel Fdbk Loss F5048 error, even when I change parameter 150 to Encoderless.
Anyone with a little bit of experience using these drives?
 
Those drives prefer you to set that via the quick start and then running the autotune settings.

Edit: Also, isn't p64 the motor feedback setting? 150 is what.. data in?
 
Last edited:

Similar Topics

Good Morning , I have a customer that lost a Allen Bradley 1336 Impact drive last night. Allen Bradley does not build this drive anymore ...
Replies
6
Views
3,699
Does anyone know if its possible to "reset" or "change" the password of an old Allen Bradley "1336 PLUS" VFD without knowing the current pasword?
Replies
3
Views
8,234
I am trying to set up one of these drives on a high speed test cell where the max speed is 14900rpm. Parameters 40 and 41 (Rev Speed Limit and...
Replies
8
Views
4,736
I have a client who periodically experiences network communication issues. Sometimes when I VPN into the site, their SCADA systems will flash comm...
Replies
2
Views
69
Hi Having issues with a older PanelView touch not working. Screen is connected to a Desktop computer. screen used as a display with touch...
Replies
1
Views
78
Back
Top Bottom