tim_callinan
Member
Hello Folks,
I hope all of you are keeping well. Im doing a project with a couple of students at the local community college - were trying to get a P525 working. We have a three phase motor connected - no mechanical load current is about 0.5A. We can turn on a mechanical brake and get the current up to 3A. We dont leave the brake on for too long cause we dont want to damage the motor.
We know P033 is the motor overload current which we set at 1 AMP.
Is it possible to get the VFD to kill the motor if it goes above the P033 and better still can we kill the motor and turn on one of the digital outputs to turn on a light.
Any advice is defo appreciated.
Tim
I hope all of you are keeping well. Im doing a project with a couple of students at the local community college - were trying to get a P525 working. We have a three phase motor connected - no mechanical load current is about 0.5A. We can turn on a mechanical brake and get the current up to 3A. We dont leave the brake on for too long cause we dont want to damage the motor.
We know P033 is the motor overload current which we set at 1 AMP.
Is it possible to get the VFD to kill the motor if it goes above the P033 and better still can we kill the motor and turn on one of the digital outputs to turn on a light.
Any advice is defo appreciated.
Tim