Siemens TIA Portal for 1500's - Basic vs Pro

geniusintraining

Lifetime Supporting Member + Moderator
Join Date
Jun 2005
Location
SC
Posts
8,242
I have a Siemens 1511C that I programmed, I have V16 Pro, anyone know if you can program them with TIA Basic or do you need Pro? I saw a bunch of references in the manual but it just says TIA, I know you need Pro for the 300's and the Basic will program the 1200's but what about the 1500's?

If anyone is using Basic can you see if you can choose the 1500's and 1511c specify

Thank you
Mark
 
Sorry, sometimes I open a thread to answer, then I get pulled away suddenly, then I go back to click "Post" and then someone's answer is already there.




Me>>>>All the time, then add to that auto correct and I often do not understand what I wrote. Sometimes I have those brief moments of clarity to realize what is about to happen and I quickly close the thread to save myself from myself :D
 

Similar Topics

Hi everyone I've created an FC that includes the blocks TCON, TDISCON, TSEND and TRCV. This block has to be as generic as possible across...
Replies
15
Views
1,413
Hello, i can find the CPU when searching for it. But when I go Online i just get the icon for "Not compatible" everywhere. I get no additional...
Replies
4
Views
886
Hi, I want to initialise some tags on first scan only. As they are related to wall-clock time, I want to do the initialisation when the PLC first...
Replies
4
Views
970
good , how do i calculate the instantaneous flow according to the flow totalizer in the tia portal ? 1 pulse = 1m3/h
Replies
18
Views
1,411
Good, Code Totalizer: IF ( Hour = 23) and ( Minute = 59) and ( Second = 59) THEN totalizerDay_previous : = totalizerDay; totalizerDay= 0; End_IF...
Replies
8
Views
1,518
Back
Top Bottom