Delta PLC communication with barcode scanner over RS485
- Thread starter HARRY1489
- Start date
http://www.plctalk.net/qanda/showthread.php?t=112803
The above link may help get you started.
Part numbers would help to determine connections and any additional equipment that may be required. Does the PLC model have an RS485 or do you need to convert?
Regards,
The above link may help get you started.
Part numbers would help to determine connections and any additional equipment that may be required. Does the PLC model have an RS485 or do you need to convert?
Regards,
Similar Topics
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Hi Everyone,
I am currently trying to communicate ControlLogix PLCs via EtherNet/IP with Delta V DCS. There is a VIM2 card configured for...
Hello,
I'm facing a problem in communication between my delta TP70P-32TP1R HMI and DVP20EX2 PLC. I tried multiple ways in order to set the...
Hi PLCTalk Family,
I am currently using S71200 for UDP communication in one of our projects. Recently due to the chip shortage looking out to...
Hi, I want to communicate slc5/03 cpu with Delta tp04 hmi through rs232 port. I tried through 1747cp3 cable directly but can not communicate...