You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

Thread Tools Display Modes
Old October 29th, 2010, 07:46 PM   #1

gtoka is offline
Join Date: Sep 2010
Location: Bs.As
Posts: 20
canīt complete integration of the WinCC flexible project on step7

hey guys,
im trying to integrate the project following this tutorial:

Proceed as follows to integrate a WinCC flexible project in STEP 7.

1.Open the WinCC flexible configuration.
2.Select the menu command "Project > Integrate in STEP 7...".
The "Integrate in STEP 7 projects" dialog opens.
3.Select the relevant STEP 7 project in the dialog box.
If the project you desire is not listed, navigate via the search field to the folder in which the STEP 7 project is located.
Integration is executed once you select the STEP 7 project.

This 3 steps is ok!

Parameterization of the connection / communication partner
In the "Stand alone" mode you have set all the connection parameters to the controller manually.
In the "Integration" mode you can define the station via which the communication partner is to be addressed using the selection menu. The addresses are then transferred automatically.
Furthermore, using this measure with the tags, you can access the symbolic connection.

4.Open the STEP 7 project in which you previously integrated the WinCC flexible project. OK
5.Mark the HMI station and double-click to open the "Configuration" of the HMI station.OK
6.Open the "Properties" of the operator panel's interface and define the interface and address.????????????????????

in my configuration does not appears this!
attached file

please any help?
Attached Images
File Type: jpg wincc.jpg (150.1 KB, 34 views)
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
opening WinCC project on another computer Pandiani LIVE PLC Questions And Answers 5 January 27th, 2013 03:53 PM
Opening older project with WinCC Flexible 2008 runtime... Syrist LIVE PLC Questions And Answers 2 March 24th, 2010 04:15 PM
WinCC and WinCC Flexible comparission Gromit LIVE PLC Questions And Answers 2 September 12th, 2009 03:16 AM
wincc & wincc flexible differences is_razi LIVE PLC Questions And Answers 1 September 18th, 2008 11:24 PM
WinCC project reading STEP 7 project symbol table Pandiani LIVE PLC Questions And Answers 1 August 11th, 2005 04:20 PM

All times are GMT -4. The time now is 05:43 AM.