CompactLogix PLC status information on HMI

Hey guys,

We are using a compactlogic 5069-L33 with an Panelview in our project.
Currently busy with some diagnostics displays of the PLC and it's status.

I understood that there are build-in commands to retreive information
like "[PLC]@Mode" to retreive the mode of the PLC

Is there any PDF or document where all useable commands are listed?

Thanks in advance!

Cheers

https://literature.rockwellautomation.com/idc/groups/literature/documents/pm/1756-pm015_-en-p.pdf

This should cover it. You would use GSV to "Get System Variable" and SSV for "Set System Variable"

I didn't realize there were this many status items available.
I need to start using these.

Rockwell put all of the information in the FactoryTalk Linx Getting Results Guide, pages 46-49:

https://literature.rockwellautomation.com/idc/groups/literature/documents/gr/lnxent-gr001_-en-e.pdf

It looks like not all of them are available for every PLC and some may depend on Panelview and PLC firmware revisions.

_Dock_ said:

https://literature.rockwellautomation.com/idc/groups/literature/documents/pm/1756-pm015_-en-p.pdf

This should cover it. You would use GSV to "Get System Variable" and SSV for "Set System Variable"

Click to expand...

He was referring to FT items, no need for the PLC GSV/SSV, you access them directly from HMI. The PDF Pickelmon referenced is what he was wanting.

Picklemon said:

I didn't realize there were this many status items available.
I need to start using these.

Rockwell put all of the information in the FactoryTalk Linx Getting Results Guide, pages 46-49:

https://literature.rockwellautomation.com/idc/groups/literature/documents/gr/lnxent-gr001_-en-e.pdf

It looks like not all of them are available for every PLC and some may depend on Panelview and PLC firmware revisions.

Click to expand...

Thanks Picklemon, that solved my question!

Cheers!