DI card Interface

Hello,
We have the following DI card from Siemens 6DL1131-6BL00-OPH1. Can this card be wired to a 3 wire PNP sensor. With the 24v+ and 0v coming from a power supply and the signal going to an input channel?

Thank you

In a word yes PNP is the most common i.e. source, NPN is sink.

Thanks for this. The attachment is for the 16 channel but the 32 is similar I was confused around the 1 wire input of the 32 channel. If we have 6es7654-6cp00-3bf0 terminals can we put a 24v+ and 0v onto the switch and take the signal wire into the DI card?

Thanks again.