allen bradley panelview550 firmware

arjunmurali17

Member
A
Join Date
Jan 2019
Location
uae
Posts
3
Dear team,
I am trying to update the firmware of allenbradley panelview550 model 2711-K5A2 keypad type with previous firmware ver4.20.i used the firmware update utility to upgrade firmware,selected firmware file from list and com port is also detected as I use a UIC dh485 convertor for communication.But when boots up it showing error code 32 always after booting and gets stuck there always.The problem is its showing error in downloading firmware as RESET PANELVIEW TO START FIRMWARE DOWNLOAD-NETWORK IS IDLE.This model hmi don't have a reset switch so I am confussed what to do next.
 
firmware550

newattachment.php
Mike please find the attached image of my last step.
 

Similar Topics

R
Allen-Bradley Analogue Input 1756-IF16 Scaling
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Replies
2
Views
39
OkiePC
OkiePC
G
Allen-Bradley visualization architecture (SiVArc analogue)
Dear community, I am trying to find a tool for Allen-Bradley PLCs similar to SiVArch for Siemens PLCs to automatically generate faceplates and...
Replies
0
Views
44
Gunman
G
D
Allen Bradley 1734-AENT issue
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...
Replies
5
Views
230
dummy_bit
dummy_bit
K
Places to sell surplus Allen Bradley PLC's and various other items
Hello, I am new here. I am trying to find good places to sell some surplus items that I have that isnt through ebay. Does anyone have any sources...
Replies
5
Views
334
tlf30
tlf30
H
A/I module 1756-IF16 Allen Bradley
Hi all, installed on chassis A17 an A/I from Allen-Bradley , problem is what ever I do , all channels are sticked on value 39.9 and cannot change...
Replies
1
Views
132
dummy_bit
dummy_bit
Back
Top Bottom