Guardlogix 5380 Firmware V31 & V32 Issue

Mispeld

Member
Join Date
Feb 2017
Location
VA
Posts
644
This seems worthy of cross-posting here since many people may be potentially affected by this anomaly.

Product Notice 2021-02-003 - GuardLogix 5580 Controller with V31 through V32 Firmware May Experience a Major Non-Recoverable Safety Fault when Online Editing is Interrupted

Access Level: Everyone

Partial quote:

"Introduction
This Product Notice informs you of a potential anomaly that exists with firmware for the GuardLogix® 5580 Controller. The SIL3/PLe configuration of GuardLogix 5580 controller and 1756-L8SP safety partner pair may experience a Major Non-Recoverable Safety Fault (T:14 C01, 03, 07 or 09) when online editing is interrupted."

More details available at the linked tech note.
 
This seems worthy of cross-posting here since many people may be potentially affected by this anomaly.

Product Notice 2021-02-003 - GuardLogix 5580 Controller with V31 through V32 Firmware May Experience a Major Non-Recoverable Safety Fault when Online Editing is Interrupted

Access Level: Everyone

Partial quote:

"Introduction
This Product Notice informs you of a potential anomaly that exists with firmware for the GuardLogix® 5580 Controller. The SIL3/PLe configuration of GuardLogix 5580 controller and 1756-L8SP safety partner pair may experience a Major Non-Recoverable Safety Fault (T:14 C01, 03, 07 or 09) when online editing is interrupted."

More details available at the linked tech note.

+1 - thanks for the post
 

Similar Topics

Hello, I am trying to install the Firmware in a Compact GuardLogix 5380 PLC. I am running RSlinx Classic and controlFLASH on a virtual Windows...
Replies
3
Views
2,599
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
Replies
0
Views
93
I had a comms fault between my VFD and Controller (5069-L320ERS2) that started about a month ago and happened maybe once a day to now where it...
Replies
1
Views
283
Looking to Print over ethernet with a 5069-L320ERMS3 Compact GuardLogix 5380 Safety Controller. Printer model yet to be provided. But a few...
Replies
5
Views
1,579
I have a 5069-L306ERS2 set to dual IP mode. Both ports are set to static IP address and have different IP addresses, subnet masks, and gateways...
Replies
11
Views
2,565
Back
Top Bottom