Micro 820 -DeviceNet - Slave

Oliver Micka

Member
Join Date
Oct 2015
Location
Hlohovec
Posts
65
Hi, I need help,
It is possible use to Micro820 with 2080-DNET20 than to Slave I/O ?
If i Add 2080-DNET in to the RsNetworx(DNET), I dont seen this card in to the Main DeviceNet scanner. ( Scanlist )


i need send/recieve a several tags throught the devicenet from/to Micro820 ( i dont have ethernet on this part of line )

dnet20.PNG
 
Last edited:

Similar Topics

I’m running a micro 820 to measure a tank level, then turning on equipment at certain levels. I have an analog input (4-20) that I’m storing and...
Replies
10
Views
208
Hi All, I came up with this for ramping the PWM pin on the micro 820. I'm new to ladder logic so I am not sure if this will even work? Once...
Replies
6
Views
323
The micro 820 is visible in RS Who when I configure my Ethernet to capture the random IP. I am getting an error when following the steps below...
Replies
9
Views
910
Hi! I need help converting an old MicroLogix 1100 project to Micro 820. Project Details I have an old MicroLogix 1100 program that has been in...
Replies
0
Views
454
Back
Top Bottom