How to connect FATEK FBs-60MA with Delta Dop series

Ashraf33

Member
A
Join Date
Apr 2021
Location
Karachi
Posts
2
I tried connection as shown in the picture
but receiving error " communication error F. ... Controller station no. Error"

IMG_20210417_113709.jpg IMG_20210417_113727.jpg
 

Similar Topics

C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
61
Chris3EC
C
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
72
Para
P
T
HMI shows motor running even though disconnect is on.
Here's what happened, Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
Replies
8
Views
325
TheColt46
T
J
Rockwell Techconnect service contract price increase?
What has been your experience with year over year price increases on your Tech-connect service contracts? Is it up to the distributor? 30% seems...
Replies
5
Views
281
bill4807
B
A
Connect a single quadrature encoder to more than one input device
Hello, friends, I am trying to upgrade a system that uses an Onrom incremental encoder (E6B2-CWZ6C) connected to a Danfoss VFD (FC360), but now...
Replies
4
Views
270
Aure_PLCs
A
Back
Top Bottom