I am upgrading four SLC 5/01 to SLC 5/04 and SLC 5/05. I didn’t have problem changing the program from SLC 5/01 to SLC 5/04. I am having problem with SLC 5/05. I am using MCP03 cable (RS232) cable and I have only one serial port on my Computer. I am having problem with RSLinx to configure the SLC 5/05.
The FLT (SLC 5/05 CPU) light is flashing
I am using RS23 DF1 communication protocol
I am using RSLinx 2.20.01,
What could be that I am missing?
thanks feo help
The FLT (SLC 5/05 CPU) light is flashing
I am using RS23 DF1 communication protocol
I am using RSLinx 2.20.01,
What could be that I am missing?
thanks feo help