Hello! I am trying to determine the correct Kepware driver to use to have Kepware read data from an Allen Bradley SLC5/04 PLC via a Prosoft PLX51-DF1-ENI Gateway. I have attached a segment of the network for better illustration.
What I have Tried:
I was hoping that someone has had a similar setup and have got it working. My alternative is to send all the required data from the SLC5/04 to the CompactLogix using message commands. I would then have Kepware poll it. Trying to avoid that.
Thank you in advance for reading and responding to my post!
What I have Tried:
- I can upload/download the program from/to the PLC through the gateway.
- I can view live values using RSLogix500.
- I can send message commands from the CompactLogix PLC to the SLC5/04.
- I can open the webpage on the gateway using the computer with that contains the Kepware Server.
- Used the Kepware ENI:SLC 500 Modular and Fixed I/O, Micrologix 1100 and 1400 drivers.
Thank you in advance for reading and responding to my post!
Last edited: