Toshiba TS3000 with Ethernet/IP to Rockwell PLC

RockyLeafs

Member
R
Join Date
Aug 2014
Location
Southwestern Ontario
Posts
80
Has anyone had any luck getting a Rockwell PLC (Compactlogix with Ethernet/IP) to communicate to a Toshiba TS3000 with Ethernet/IP.

I imported the EDS file, the IO says its ok (running) but not seeing any input/output change states between the PLC and robot controller.

I followed all the steps in the Fieldbus manual but no luck yet...
 

Similar Topics

M
Toshiba G3 Can't access to menu parameters trohugh lcd display
Hi, I have two Toshiba G3 Tosvert-130, one of them I can see monitoring mode, I can control with the LCD display, recently I changed the presets...
Replies
1
Views
342
JeffKiper
JeffKiper
OkiePC
ML1500 to Toshiba VF AS1 via Modbus RTU
I inherited a system with the Micrologix 1500 talking to 8 VFDs using Modbus RTU protocol. One of the VFDs was replaced with a Toshiba VF AS1...
Replies
1
Views
1,199
OkiePC
OkiePC
P
Toshiba EX100
Another software thread! We have a Toshiba EX100 that's just been working away quietly in a panel for 20 years, never causing a problem to...
Replies
1
Views
1,199
kennadrin
K
J
Toshiba VF-S11
Hi, Any body had success to change parameters in between a Toshiba Inverter VF-S11 using a Red Lion any series (mine is K304), and MODBUS RTU...
Replies
1
Views
1,151
goghie
G
ganutenator
I'm loving the Toshiba drives
So far, the Toshiba drives seem to be the best out there. I wish their software was a little better though.
Replies
6
Views
2,007
BITS N BYTES
B
Back
Top Bottom