Hey guys,
Trying to get this working and have looked through a few articles. I have a SLC 5/05 at 192.168.10.160, a 1761-NET-ENI on the network at 192.168.10.151 that is connected to the serial port of another SLC 5/05 (through serial licensed radio). In the routing table I have node zero as 192.168.10.151. I have read some of Ken roaches posts that say the routing table is unnecessary for this to work, but for now I have it in there. I can ping all of the IP's, I can see the "remote" PLC in RSlinx. I am trying to message Read/Write to the remote without success. I have tried the multi-hop with the address as 192.168.10.151,1,0 and 192.168.10.151,0,0. Neither seem to work. Any assistance for me?
Thanks guys!
Trying to get this working and have looked through a few articles. I have a SLC 5/05 at 192.168.10.160, a 1761-NET-ENI on the network at 192.168.10.151 that is connected to the serial port of another SLC 5/05 (through serial licensed radio). In the routing table I have node zero as 192.168.10.151. I have read some of Ken roaches posts that say the routing table is unnecessary for this to work, but for now I have it in there. I can ping all of the IP's, I can see the "remote" PLC in RSlinx. I am trying to message Read/Write to the remote without success. I have tried the multi-hop with the address as 192.168.10.151,1,0 and 192.168.10.151,0,0. Neither seem to work. Any assistance for me?
Thanks guys!