Saulo35
Member
Hi,
When simulating my project, calling a numeric keypad causes MAPware 7000 to slow down to a crawl, and the keypad does not accept keys pressed. The numeric keypad's "display" varies between "0.00" and "0.0_". Has anybody experienced this?
Details:
- Windows 10
- MAPware 700 Version 2.35 (Nov 19, 2019)
- DELL Laptop with 8 GB of RAM.
- HMC 7070A-M
- Task manager shows MAPware hogging 28-35% of the laptop's CPU
Tried increasing the program's priority in Task Manager. No improvement.
MAPware does not crash, it's just very very sluggish. It takes a lot of patience to exit the simulation mode.
Thank you
When simulating my project, calling a numeric keypad causes MAPware 7000 to slow down to a crawl, and the keypad does not accept keys pressed. The numeric keypad's "display" varies between "0.00" and "0.0_". Has anybody experienced this?
Details:
- Windows 10
- MAPware 700 Version 2.35 (Nov 19, 2019)
- DELL Laptop with 8 GB of RAM.
- HMC 7070A-M
- Task manager shows MAPware hogging 28-35% of the laptop's CPU
Tried increasing the program's priority in Task Manager. No improvement.
MAPware does not crash, it's just very very sluggish. It takes a lot of patience to exit the simulation mode.
Thank you
