Baker in Virginia
Member
Good Afternoon ,
I'm working on a Shift Register , and I have a Tag called ....
Tracking Vision Result
Tag Data Type - DINT [313]
I'm using a Compare Instruction GRT , to activate a Dump Gate. I have position [212] , in my compare , if it is greater than 0 , activate the Dump Gate.
In my compare , I have Tracking Vision Result [212] , and it displays 0 ,
I would like to have it display 0000_0000_0000_0000 in Binary .
I would like to have it in Binary in the instruction so I can see the 1's and 0's go by . I know I can monitor in controller tags , in Binary , etc.
How can I do that ?
Thanks so much for your help.
I'm working on a Shift Register , and I have a Tag called ....
Tracking Vision Result
Tag Data Type - DINT [313]
I'm using a Compare Instruction GRT , to activate a Dump Gate. I have position [212] , in my compare , if it is greater than 0 , activate the Dump Gate.
In my compare , I have Tracking Vision Result [212] , and it displays 0 ,
I would like to have it display 0000_0000_0000_0000 in Binary .
I would like to have it in Binary in the instruction so I can see the 1's and 0's go by . I know I can monitor in controller tags , in Binary , etc.
How can I do that ?
Thanks so much for your help.