bigbuckaroo
Member
Recent process was upgraded by outside company utilizing a Contrologix and PanelView Plus. Everything working great no issues. Boss decides he wants an addition made to a screen on the PanelView Plus. I fire up the Factory Talk View software and open the project. Before I do anything I go to the transfer utility and do a compare. It tells me they are identical. I add 3 momentary pushbuttons to a screen. I download the project to HMI. I go to the HMI because I am programming this through our network, and check the screen. Changes are not present. I reboot the Panelview Plus and again check. Still no changes present. I go back to my computer and do another compare where the project on my computer shows the changes I made and the unit in question. Again it says they are identical which to me means the changes should be there. Now what the heck is going on?? I do not use Factory Talk View hardly at all but I have made changes to a different unit about 6-8 months ago with no issues. Can somebody enlighten me as to what I could be doing wrong?