You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

Thread Tools Display Modes
Old July 21st, 2021, 02:04 PM   #1
United States

BabyLuda is offline
Join Date: Jul 2021
Location: Arizona
Posts: 1
GE Fanuc 90-30 CPU350

Hello everyone. I have a one off machine that uses a GE Fanuc 90-30 part number IC693CPU350-CE. The only software I have for my computer is Proficy Machine Edition 7.0. I'm trying to do an upload and get a copy of the program printed to help with troubleshooting and eventually convert to a micrologix. The vendor has been less than helpful, and a colleague says they password protected the PLC. This is unverified though. (I don't even see a spot to type a password into) I have cable IC690USB901. I have no other knowledge about what software was used to download to the PLC or anything else.

My issue.. I get the software open and select my series 90-30 PLC. Get the com port set up on the target and then hit go online. It just keeps trying and trying. The retry count keeps incrementing up. Once I click go online, I see the PS Port flashing green as if it is communicating. If I change the baud rate or the parity and try to go online the PS Port will not blink. Any ideas on what to try next? I've searched all over and have had no luck.
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
DL05 and GS4 Modbus ASCII Issue STEMAPPLICATIONS LIVE PLC Questions And Answers 17 May 9th, 2020 01:55 AM
Ge fanuc 90 30 backup without availability of engineering station mailmdeepak LIVE PLC Questions And Answers 1 April 26th, 2018 09:46 AM
GE Fanuc Series 90 30 Johnny T LIVE PLC Questions And Answers 31 April 22nd, 2018 04:06 PM
Ge fanuc 90 -30 programing using lm 90-30 mamadoo95 LIVE PLC Questions And Answers 3 March 25th, 2011 01:29 PM
GE Fanuc 90 30 info leitmotif LIVE PLC Questions And Answers 3 August 4th, 2007 01:52 PM

All times are GMT -4. The time now is 05:26 PM.