Monitoring Timer Timing Unity Pro S.

Hello,
I am looking for the best way to monitor that a timer is timing in unity pro. I am used to having the .tt bit.

I see that I can see the time elapse with the ET output. What would be the best instruction to monitor that to know that the timer is in a timing state?

Many Thanks!

If you are using the EN you can use ENO to show that the block is enabled, but this still not be timing, it depends how your logic is but you could use your logic that is connected to IN to enable EN.

Either that or use some logic to check when ET > 0, lots of ways of doing it but the TON has no direct way that i know of.

If In input is on and Out output is not on then timer is timing

GeoffC said:

If In input is on and Out output is not on then timer is timing

Click to expand...

You can make TON timer and GeoffC's method to inside own DFB-block