Omron CX-Programmer Call Functions from Structured Text

Hann

Member
H
Join Date
Nov 2022
Location
New Zealand
Posts
16
Is there a way in CX-Programmer to call functions from a structured text program?

I have found this manual that seems to describe the process however I am not yet able to replicate it.

http://www.etitudela.com/entrenadorcomunicaciones/downloads/introduccionbloquesdefuncionfb.pdf
Yk2yC8J.png


My Attempt:
Function:
9xgZHQH.png


Function
S6z1BaM.png

IphB2Xd.png

aCuu3iW.png


Structured Text Program:
YjdTbpn.png


Calling function:
F9GhgKp.png


Error:
J4ieUr5.png
 
Last edited:

Similar Topics

H
Omron CX-Programmer Call Ladder Instructions from Structured Text
Is there a way in CX-Programmer to call Ladder Instructions from a structured text program? I can see several functions in the autocomplete...
Replies
3
Views
2,374
parky
P
R
Cant go online with OMRON C200HX-Cpu 44. Using cx-programmer 9.7, via plctoolbus. what am i doing wrong?
using toolbus to configure the settings. never worked on omron before. any help would be greatly appreciated.
Replies
5
Views
181
ROM
R
D
Help finding addressed inputs and outputs within CX Programmer (Omron PLC)
I'm new to Omron PLCs and am trying to troubleshoot a problem on one. An input "jog" button I'm pressing should be turning on an output motor but...
Replies
0
Views
228
dshaffst
D
R
OMRON CX-Programmer ladder instruction help
Hello, I am working on a translation of an OMRON CPM2* PLC program from CX-Programmer to Siemens TIA Portal to use with a new S7-1215 CPU. The...
Replies
3
Views
305
parky
P
K
Omron CX-Programmer with Zebra ZT610 Printer Issues
Hello ! I am trying to use an omron cj2m-cpu33 with a CP1W-CIF01 plug in serial connector to talk to a zebra ZT610 printer. I am getting the data...
Replies
8
Views
749
kevilay
K
Back
Top Bottom