pws6a00t-p

[dj yang]

hello.
I am an electronic device repair company in Korea. I would like to ask several experts for advice.
As shown in the picture, the program does not run and a firmware error appears. Can the program be deleted?
And transfer files using the adp program.
As shown in the picture, the HMI will beep and say "disconnection", and the PC will display timeout! This is output.
Dip switches 5 and 6 are off and the rest are on.

 

[parky]

I believe this is a re-badged item built buy Beijers, almost certainly it will show error if not connected to the PLC, however, I would look on the beijers website there may be still some documents on this model like settings etc.

 

[robertmee]

I believe this is a re-badged item built buy Beijers, almost certainly it will show error if not connected to the PLC, however, I would look on the beijers website there may be still some documents on this model like settings etc.

Firmware is corrupted as noted by the checksum. Until that is fixed, doubtful it will do anything.

OP, contact the manufacturer about flashing the firmware. Do you have a backup copy of the program to reload after the firmware is flashed?

 

[parky]

Ah.. I missed that fail might need new glasses lol.

 

[dj yang]

체크섬에서 알 수 있듯이 펌웨어가 손상되었습니다. 이것이 고쳐질 때까지는 아무것도 할 수 없을 것 같습니다.

OP, 펌웨어 플래싱에 대해 제조업체에 문의하세요. 펌웨어 플래싱 후 다시 로드할 프로그램의 백업 사본이 있나요?

답변이 늦어서 죄송합니다. 백업 사본이 없습니다.