Scada connection

JTOR

Member
J
Join Date
Sep 2024
Location
Netherlands
Posts
1
Existing PLC :IM151-8 PN/DP
Simatic manager

Customer would add a Scada application
Reading data of Datablocks in the PLC
Does this require a change at the PLC configuration for reading the data,so only reading ?
Routing is done by Router for required IP range
 

Similar Topics

N
Ciect Scada 7.2 connection to m340 via MODNET
Hi everyone! I am newbie here so be kind) I have some m340 plcs in one network and one TSX quantum, that reads data from them via io scanning...
Replies
3
Views
1,577
NickEfanov
N
T
Citect scada M340 connection status
Hello, M340 plc. 3 standalone citect scada applications. Connection type (OFS server). Same application on all 3 stations and multiple logins to...
Replies
2
Views
1,974
the18
T
A
Connection between Ab micrologix 1400 and Citec scada 16
We are using ab micrlogix 1400 and citec scada 16 we need to connect both using Ethernet connection can we assign tags for inputs and outputs in...
Replies
0
Views
1,200
ADHITYAN
A
R
WinCC 7.4 Scada connection with Multi branded PLC's
Hi, I am working on a project in which, we have a requirement to connect multiple PLC's with WinCC scada. The scenario is that we have multi...
Replies
2
Views
3,362
sigmadelta
S
L
S-414-3 PN/DP connection to citect scada 6.10
I have citect scade project in pc station connected to plc 414 and working fine. The pc station is getting very old and wold like to swap it with...
2 3
Replies
31
Views
6,416
sigmadelta
S
Back
Top Bottom