Guys I need your regarding my newly installed VMware player. I have a Dell Laptop with Windows 7 OS and I recently installed VMware Player with Windows XP OS. On Windows XP using VMware I installed Rockwell software such as lower version of RSlogix 5000 up to version 17, SLC500 and PLC 5 as well. After activating these software on XP I configured the network adapter on the VMware PLayer, the network was is set Bridge (Replicate physical network connection state). I've connected the my laptop on the PLC network and open the RS linx Classic to view active PLCs. In the RSwho It seems that only SLC500 are being recognized by the RSlinx while all Logix5000 processor are unrecognized devices. I don't know exactly if there is a problem with my network adapter settings please help....
VMWare unrecognized Logix 5000 devices on RSLinx
- Thread starter elex
- Start date
Similar Topics
Good Evening All,
I'm having a bit of trouble getting my 1756-ENBT to be fully recognized on my Windows XP SP2 Vmware Workstation virtual...
Greetings all. I am having a new problem with my VM. Host OS is 11 and VM OS is 10. I have two smaller monitors that connect to my laptop which...
So, I have a little dillemma I am trying to work through but I feel there is probably a better way. I've always liked the idea of using a VM in...
*VMWare vCenter Converter Standalone version 6.3 & 6.4
Hello Experts
I want to convert my current physical hardware machine to a virtual...
Hello Hivemind
My wife has a legacy machine at her work which uses (or I should used) an XP desktop with a serial port to communicate with a...
