mkekkonen
Member
In an Oil Facility I need to connect two Panelviews Plus terminals via DH+ to a Controllogix PLC and a PLC5.
The Controllogix is the common connection point with a DH+ Module.
Channel A connects both PVPluss' to the Controllogix PLC and Channel B connects the PLC 5 to the Controllogix PLC.
Using RSlinx version 2.55.00.16 CPR 9 SR 2, I configured the
DHRIO/E (Product type 12, Product code 18, Revision 7.2) Routing Table as shown in the attached screen capture.
The RS View Studio ME RSlinx Enterprise config is shown in the second attachment. I am having an issue with the routing tables and the bridges (if they are required - I think they are). Can anyone shed some light on this?
The Controllogix is the common connection point with a DH+ Module.
Channel A connects both PVPluss' to the Controllogix PLC and Channel B connects the PLC 5 to the Controllogix PLC.
Using RSlinx version 2.55.00.16 CPR 9 SR 2, I configured the
DHRIO/E (Product type 12, Product code 18, Revision 7.2) Routing Table as shown in the attached screen capture.
The RS View Studio ME RSlinx Enterprise config is shown in the second attachment. I am having an issue with the routing tables and the bridges (if they are required - I think they are). Can anyone shed some light on this?