S7_400 CPU412 download problem

[Arun]

We are changing a PLC of old machine with new Siemens S7-400. Programming and machine trial job is uploaded to OEM. We are doing wiring. As wiring is completed we are trying to load PLC program (supplied by OEM) in the CPU but we are getting the error (see attached screen shot)
We found power supply selection is wrong in hardware configration we corrected it, all the profibus nodes are OK and we able to see them in accessible nodes in simatic manager. Today we use Siemens field PG but same problem we though that our USB MPI covertor baudrate may not matching with CPU.

Can some one throw light on the issue?

regards
arun

 

[Scrapper]

What is the selected PG/PC interface for STEP-7?

 

[Arun]

What is the selected PG/PC interface for STEP-7?

MPI 1.5mbps highest node address 31.

 

[erdemsvri]

MPI 1.5mbps highest node address 31.

Hello.

Try MPI with 187.5 kbps. The default speed for Siemens PLC's MPI port is 187.5 kbps.

 

[Arun]

Hello.

Try MPI with 187.5 kbps. The default speed for Siemens PLC's MPI port is 187.5 kbps.

I have tried that one doesn't work.

 

[manoj.kumar]

Please Check the Driver of MPI cable in filed PG