jim-garcia
Member
Hello all
we have 4 plc ABB Model Procontic 07 KT 93 R101 connected
Together with a coaxial cable the network named is CS 31 and as a Master there is
a computer with an ARCNET card installed for program the logic of all plcs and after
that to send the values and force bits like and HMI
as the procontic software for plc is not any more in the market
and not support or software is available we are missed and
don't know what to do about does any one know some way
to upload the logic for make diagnostics or translate
into a new plc from abb or other brand
thank you in advance
Jim
we have 4 plc ABB Model Procontic 07 KT 93 R101 connected
Together with a coaxial cable the network named is CS 31 and as a Master there is
a computer with an ARCNET card installed for program the logic of all plcs and after
that to send the values and force bits like and HMI
as the procontic software for plc is not any more in the market
and not support or software is available we are missed and
don't know what to do about does any one know some way
to upload the logic for make diagnostics or translate
into a new plc from abb or other brand
thank you in advance
Jim