Hi all - I'll get straight to the point:
Problem: Customer has Chinese machines with all motors rated for 220 or 380, but the ware house distribution system is 208.
Background: With the motors setup as delta (220), the motors seem to be running just fine. Some of the motors that are still configured as Y (380) seem to be running well except for the 'soft start' effect from the lower voltage.
Question: Can we leave the Y (380) connected motors on the 208 distribution system?
Any help will be welcomed.
Problem: Customer has Chinese machines with all motors rated for 220 or 380, but the ware house distribution system is 208.
Background: With the motors setup as delta (220), the motors seem to be running just fine. Some of the motors that are still configured as Y (380) seem to be running well except for the 'soft start' effect from the lower voltage.
Question: Can we leave the Y (380) connected motors on the 208 distribution system?
Any help will be welcomed.