I'm attempting to use a Red Lion Data station for the first time using crimson 3. While I find mapping data from one device to another (using device specific drivers) fairly intuitive, I'm at a total loss on using raw ports.
Specifically, I have a micrologix connected to the RS232/PG port with the DF1 protocol. I'd like to send string data from the PLC to a RAW TCP/IP port. Where to start with this is throwing me a curve.
Can anyone point me in the right direction?
Specifically, I have a micrologix connected to the RS232/PG port with the DF1 protocol. I'd like to send string data from the PLC to a RAW TCP/IP port. Where to start with this is throwing me a curve.
Can anyone point me in the right direction?