OMRON CPL1 USB Type2

kalabdel

Member
Join Date
Feb 2015
Location
Ontario
Posts
1,108
Hello Gentlemen,


I would connect to an OMRON CPL1 to upload the existing program and want to make sure that the required cable is a simple USB2 to USB Type B. I'm running CXOne 4.4 on Windows 7.

Thanks
Kal

IMG_20170208_170059.jpg
 
Last edited:

Similar Topics

Hello all, Probably a newbie question, but how to program this (se picture) is it HZ saying something about total time, and duty saying somehing...
Replies
2
Views
1,869
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
180
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
72
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
112
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
268
Back
Top Bottom