Marcosbelgo
Member
Hi friends, this is my first post in this forum.
I am Implementing an application that works like this:
I want use the RS-485 interface of MICROLOGIX 1400 communicating ModBus RTU with RS-485 interface of a Gateway (Modbus RTU/wirelles).
My question is:
If the RS-485 interface of Micrologix is a serial port DB-9 with many pins and the RS-485 interface of the gatway is just two connectors, is possible make the connetion?
Can I unplug the cables and just get the two cables from the communication and connect on the bournes of gatway? This work?
I attached the connetion schematic of AirGate-Modbus (from NOVUS manufacturer):
http://www.novus.com.br/downloads/Arquivos/v11x_c_manual_airgate-modbus_português_a4.pdf
Thanks
I am Implementing an application that works like this:
I want use the RS-485 interface of MICROLOGIX 1400 communicating ModBus RTU with RS-485 interface of a Gateway (Modbus RTU/wirelles).
My question is:
If the RS-485 interface of Micrologix is a serial port DB-9 with many pins and the RS-485 interface of the gatway is just two connectors, is possible make the connetion?
Can I unplug the cables and just get the two cables from the communication and connect on the bournes of gatway? This work?
I attached the connetion schematic of AirGate-Modbus (from NOVUS manufacturer):
http://www.novus.com.br/downloads/Arquivos/v11x_c_manual_airgate-modbus_português_a4.pdf
Thanks