Lisa3003Lisa
Member
I'm using FactoryTalk ME version 13. I have an alarm banner that is an on top display. Whenever there is an alarm this banner becomes visible to showcase the alarm message. Now, I want it to disappear whenever there is no fault active anymore. Within the display settings, the check box for Cannot be Replaced is not marked.
I read somewhere that I could use the remote close display option within the alarm setup. So, I added my PLC tag there. This tag is a BOOL and is true whenever there are not any faults. The tag has a read/write connection.
Within the PLC is see that the tag turns true and I would imagine that that would close the alarm banner but it does not.
Does someone have any pointers on why that is and how to make it disappear?
I read somewhere that I could use the remote close display option within the alarm setup. So, I added my PLC tag there. This tag is a BOOL and is true whenever there are not any faults. The tag has a read/write connection.
Within the PLC is see that the tag turns true and I would imagine that that would close the alarm banner but it does not.
Does someone have any pointers on why that is and how to make it disappear?
Last edited: