Plc

PLC

Member
P
Join Date
Sep 2002
Location
NC
Posts
311
Hi to everybody.
I have a Probleme with the OPC Siemens.
This is the situation:
OPC server and OPC Client are on the same PC and the PC belongs a domain.
I am not able to be linked to the server.
I have checked the DCOM properties and they seem correct. All works well on a PC which does not belong any domain.
Does somebody know how to set up the DCOM component on a PC in a domain?

Thank you.
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
6
Views
113
drforsythe
D
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
162
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
36
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
229
bkottaras
B
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
60
Alibaba07
A
Back
Top Bottom