How adding AOP in RSLogix5k V19

Gents,

I've a CompactLogix L35E V19 and a Telemecanique XUW vision sensor.
There is an EDS file from the XUW, and I used the EDS hardware wizard tool to install the EDS file.

Now I like to add the XUW in the IO tree, but can't find the unit in the available modules.

I also looked in RSLinx to see if the XUW is recognized, but didn't see it.

I tried to add the XUW in RSLogix 5000 V20, and imported the EDS file, and the module for the XUW is available in this version.

How can I add this EDS file in V19?

Thanks in advance!

Jack

You don't add an EDS to Logix, that is for Linx only. You need to find the "Add On Profile" somewhere, and install that.

If they don't have an AOP then they must tell you somewhere how to add it as a generic device. They would provide Assembly instance Input/Output etc.