RSLinx communication with ADAM 4561 (Over RS232)

Tremaino

Member
T
Join Date
Sep 2013
Location
London
Posts
6
Hello there,

I am trying to get an ADAM 4561 converter to talk via RS232 DF1 to a Micrologix 1400.

I know that some USB/RS232 converters simply won't support Autoconfigure on DF1, so Ive tried the default settings of ML1400 DF1 parameters; 19200 baud, 8 data bits, 1 stop bit, no parity, CRC error checking, but no luck.

Does anyone else use this device / know the configuration?

Regards,
 

Similar Topics

N
Communication between ArchestrA IDE and OPC RSLinx server between different machines
Hey! In my previous queries on how to handle an OPC server like RSLinx in the ArchestrA IDE galaxy, I have succeeded and the answer was to just...
Replies
0
Views
1,839
NathBarreiros
N
A
RsLinx Classic Communication Errors
Hey guys, I'm messing around in my rslinx classic program trying to get familiar with the Porgram, under the Driver Diagnostic General tab I...
Replies
0
Views
1,186
AsGreenAsGrass
A
E
RSLinx Ver. 2.59 Communication Fail
Dear All, I have just experience running RSLinx Ver. 2.59 to connect with ControlLogix 5000 1756-L73 with Firmware rev. 24.11, found: the RSLinx...
Replies
2
Views
1,821
Ken Roach
Ken Roach
B
RsLinx Communication via TCP Port Forwarding
Hi everyone, I have a customer that is using wireless modem to communicate to many different PLC's and HMI's. I just added my PLC and HMI to...
Replies
6
Views
3,915
Geospark
Geospark
F
RSLinx Enterprise Communication Setup
Good day, Does anyone know if the device shortcuts can be backed up, if they are stored in a SQL-Database?
Replies
3
Views
2,032
fredz0003
F
Back
Top Bottom