hardaysknight
Lifetime Supporting Member
The software: RSLogix5000 + Graphworx32 by Iconics + Iconics Unified Data Browser + Applicom OPC Server
I need to have my HMI software (Graphworx) flash a square whenever a bit from an array latches on in RSLogix 5000. The trouble is I can either use a boolean array (which means I have to use a bunch of unlatch bits), or a DINT. I want to use a DINT, but I'm only able to see the whole DINT in OPC and not individual bits from the array. I'd prefer to be able to use something like a MOV bit to reset the whole array when the machines pumps turn off.
I really hope I made sense.
I need to have my HMI software (Graphworx) flash a square whenever a bit from an array latches on in RSLogix 5000. The trouble is I can either use a boolean array (which means I have to use a bunch of unlatch bits), or a DINT. I want to use a DINT, but I'm only able to see the whole DINT in OPC and not individual bits from the array. I'd prefer to be able to use something like a MOV bit to reset the whole array when the machines pumps turn off.
I really hope I made sense.