need scada help!!

umakant15

Member

U

Join Date

May 2016

Location

nasik

Posts

13

• Jun 13, 2016

• #1

hi.. i want to configure 3 buttons using c action for open single picture window with 3 different .pdl files.
that is
if i click on 1st button then let say 1.pdl will open
if i click on 2nd button then 2.pdl will open
and for 3rd button then 3.pdl will open
but i have only one picture window.
so how can i do this???

 

Ken Roach

Lifetime Supporting Member + Moderator

Join Date

Apr 2002

Location

Seattle, WA

Posts

17,480

• Jun 13, 2016

• #2

What SCADA software package are you using ?

Your mention of *.PDL files suggests it's WinCC.

In general, you get much better advice here on the Forum if you put a little work into describing the environment you're working in and the details of the problem you're trying to solve.

 

umakant15

Member

OP

U

Join Date

May 2016

Location

nasik

Posts

13

• Jun 13, 2016

• #3

yes it is WinCC Explorer v7.2

 

umakant15

Member

OP

U

Join Date

May 2016

Location

nasik

Posts

13

• Jun 14, 2016

• #4

urgent required!!!

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,010

• Jun 14, 2016

• #5

http://support.industry.siemens.com/tf/ww/en/posts/wincc-change-page-in-picture-window-with-c-code/117007/?page=0&pageSize=10

 

umakant15

Member

OP

U

Join Date

May 2016

Location

nasik

Posts

13

• Jun 15, 2016

• #6

thank you sir!!