Connecting Laser TRUMPF with Wonderware via OPCUA Archestra Client Service

Easy91

Member
E
Join Date
Apr 2016
Location
POland
Posts
12
Hello Guys,

I have a problem with connection to Laser Trumpf via OPCUA Archestra Client Service. I cannot connect to a OPC Server installed in the LASER. However I have verified that the connection is good by an UAExpert software. The situation is like in the picture (Attachment). Have you ever tried to connect a Laser TRUMPF Trudisk1000 with Wonderware ? Any suggestions will be appreciated.

Thanks

2016-06-30_14h12_28.jpg
 

Similar Topics

T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
32
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
81
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
90
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
229
arpus4KM
A
M
Connecting Different controllers (brands) with same I/O devices - Demo Station Design
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
Replies
1
Views
149
JeffKiper
JeffKiper
Back
Top Bottom