Controlling of Motor open and close through PID

prabhuinst

Member
P
Join Date
Apr 2011
Location
Tamilnadu
Posts
20
Hi, we are using DeltaV Dcs. We have problem with Motorized damper,
we have motorized damper, But position feedback ( 0 - 100%)is there.
How to use PID by Giving output of OPEN/CLOSE

Regards,
A.Prabhu
 

Similar Topics

C
Issues Controlling Stepper Motor Driver with Eaton PLC
Hello. I am using the following: Eaton E4-AC-12RXP PLC I am trying to control the CL86T which controls a Closed-Loop Stepper motor. I am using...
Replies
3
Views
973
celmassry
C
T
Controlling a servo motor with ML1200
I had planned to use PTO instructions to control a servo motor, single axis only. We have a ML1200 BWA model. According to the ML1200 manual...
Replies
7
Views
3,483
ThreatLevelMidnight
T
S
Yaskawa P1000 Paramater editing while controlling motor
Can anyone point to documentation indicating which parameters can be changed while the Yakawa P1000 VFD is controlling a motor? I am trying to...
Replies
0
Views
994
SDC22
S
G
TIA - Controlling position of Stepper Motor
Hello, thing that makes me wonder, its the situation when we move axis from one position to other position with CommandTable. For example, after...
Replies
4
Views
1,470
BryanG
B
K
Regarding controlling 12V DC motor
Hi all, I need to control a PMDC motor speed using a PLC. Currently I am using manual potentiometer to do the same. The motor operating voltage...
Replies
5
Views
2,081
nightline
N
Back
Top Bottom