gschneider
Member
Hello all,
I am working on an application in FTV8 and all the addresses I've been given are for a PLC and listed in the following format:
B3/100
B3/101
B3/102
etc.
When searching in the PLC5 Logix file, the search function converts them as such:
B3:6/4
B3:6/5
B3:6/6
etc
So my question is, can I leave the direct reference for these as {::[shortcut]B3/100} style or do I need to change EVERY SINGLE ONE to {::[shortcut]B3:6/4} style?
Thanks in advance!!
I am working on an application in FTV8 and all the addresses I've been given are for a PLC and listed in the following format:
B3/100
B3/101
B3/102
etc.
When searching in the PLC5 Logix file, the search function converts them as such:
B3:6/4
B3:6/5
B3:6/6
etc
So my question is, can I leave the direct reference for these as {::[shortcut]B3/100} style or do I need to change EVERY SINGLE ONE to {::[shortcut]B3:6/4} style?
Thanks in advance!!