dskplc
Member
Hello,
I am struggling to put these requirements in to ladder logic since I am learning on my own:
If phase "X1Sump" is selected, enable the following:
If start from LT reached, and low LS is healthy, run until stop from LT is reached.
If Lo LS is not healthy, generate LS fault.
If Hi LS is not helathy, generate LS fault.
If LT is > Hi SP, then Hi alarm.
If LT is > HiHi SP, then HiHi alarm.
Display fault message for:
Pump
LT alarms
LS alarms
If Lo LS is not healthy, and LT > Lo alarm, then fault message "Level disagreement"
Thanks for any help getting me started.
I am struggling to put these requirements in to ladder logic since I am learning on my own:
If phase "X1Sump" is selected, enable the following:
If start from LT reached, and low LS is healthy, run until stop from LT is reached.
If Lo LS is not healthy, generate LS fault.
If Hi LS is not helathy, generate LS fault.
If LT is > Hi SP, then Hi alarm.
If LT is > HiHi SP, then HiHi alarm.
Display fault message for:
Pump
LT alarms
LS alarms
If Lo LS is not healthy, and LT > Lo alarm, then fault message "Level disagreement"
Thanks for any help getting me started.