chintankAne Member C Join Date Apr 2014 Location Surat Posts 80 Sep 21, 2016 #1 I am looking for instruction like AFI in cxprogam ladder logic.
JeremyM Lifetime Supporting Member Join Date May 2014 Location Dallas, Texas Posts 1,233 Sep 21, 2016 #2 XIC AlwaysFalse EQU 0 1 NEQ 0 0 LES 0 0 GRT 0 0
JaxGTO Member Join Date Apr 2009 Location Kalieefornia Posts 1,071 Sep 22, 2016 #3 For a PLC that does not have an AFI instruction I just put in a rung of XIC A XIO A OTE A. Then use XIC A for the AFI.
For a PLC that does not have an AFI instruction I just put in a rung of XIC A XIO A OTE A. Then use XIC A for the AFI.
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Sep 22, 2016 #4 You did not specify which plc you are using. P_Off (CF114) is the always off contact for CS/CJ/CP family. Older hardware would have a different address for this bit. Hope this will help.
You did not specify which plc you are using. P_Off (CF114) is the always off contact for CS/CJ/CP family. Older hardware would have a different address for this bit. Hope this will help.